Shooting with a camera and adjusting the settings manually can be an intimidating task to the new photographer. Veterans of the craft will no doubt remember the first roll of film they ruined by reading the light wrong, or the irreplaceable moments in time lost behind a lens cap. As a photographer, our job is to be the conductor of a symphony of moving components, gently influencing each element to ensure that the end result is more than just the sum of the parts.

Without understanding each element of photography, it's impossible to know how they relate as a whole. So let's start our trip into the inner workings of photography with one of the most unfamiliar topics: aperture.

Defining Aperture
Aperture is simply what controls the amount of light exposed on the film or your digital camera's sensor. It can be opened and closed using the F-Stop on your camera, which is usually a ring located around the lens in between the focus ring and the body of the camera. If you've ever looked into someone's eye as light was shone into it and watched the pupil get smaller, this is how the aperture works too.

Most cameras have an f stop range of 1.7/2.0 to 22 with the range of values usually increasing with the quality and cost of the camera. You can see your camera's range by looking at the numbers around your lens. Lower F-Stops are more open and expose the film to more light, while high F-Stops close the aperture and shut the light out.

How Aperture Can Impact Images
Using your F-Stop to purposefully manipulate the aperture of your camera will allow you to change the depth of field shown in your photographs. If you’re unfamiliar with the term “depth of field,” it describes how much of your photograph is blurry, and how much is sharp. Aperture directly affects the amount of time a frame is exposed; the more time the film has to absorb information, the more clarity and depth will come through in the final product.

For example, if you were to take a picture of a line of old fashioned vintage picture frames from one end using a low F Stop number (an open aperture) you would likely see one or two frames clearly and the other frames as blurry. Open apertures create a shallow depth of field. If you were to take the same photo with a high F Stop (a closed aperture), you would see a lot more antique picture frames down the line.

Fun Aperture Experiments
Playing with the aperture on your camera can be great fun once you have a bearing on what it does.  Here’s a couple of ideas to try the next time you’re out shooting and you want to test it out:

• Take every photograph twice – once at a high F-Stop, and once at a low F-Stop.
• Challenge yourself to take an entire roll at one F Stop and then switch it up.
• Put your camera on full manual and adjust the F-Stop on the fly to adjust for light

Don’t forget to adjust the shutter speed of your camera to allow for more or less light (faster speeds for more light, slower speeds for less), or you may end up with overexposed or underexposed images. Many digital cameras have a fantastic option called "aperture priority mode" which lets you choose an F Stop and will then adjust the shutter speed automatically. It is worth noting that the best conditions for experimenting with aperture are cloudy or overcast days. When faced with bright or low light, your options for F-Stop values will become limited.

Of course, the very best way to improve your photography is to take lots of pictures. Now it's time to get out there and have fun taking and displaying them on your picture frame wall!

Related posts:

1. Photography Basics: What You Need To Know
2. Photography Basics: Film Speeds for the Beginner
3. The Basics of Learning Photography
4. Digital Photography Basics
5. Digital Photography Basics -Comparing Digital Compacts to DSLRs